Real-time light dosimetry for intra-cavity ...
Document type :
Compte-rendu et recension critique d'ouvrage
Title :
Real-time light dosimetry for intra-cavity photodynamic therapy
Author(s) :
Soltana, W [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Munck, C [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Baert, G [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Mordon, Serge [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Betrouni, N. [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Munck, C [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Baert, G [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Mordon, Serge [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Betrouni, N. [Auteur]
Thérapies Assistées par Lasers et Immunothérapies pour l'Oncologie - U 1189 [OncoThAI]
Journal title :
Photodiagnosis and Photodynamic Therapy
Pages :
A34
Publisher :
Elsevier
Publication date :
2017-03
ISSN :
1572-1000
HAL domain(s) :
Sciences du Vivant [q-bio]
Sciences du Vivant [q-bio]/Cancer
Sciences du Vivant [q-bio]/Cancer
English abstract : [en]
Photodynamic therapy (PDT) is an emerging technic in oncology. The success by the achievement of the desired therapeutic effect of a PDT procedure relies on the accurate photosensitizer (PS) concentration distribution in ...
Show more >Photodynamic therapy (PDT) is an emerging technic in oncology. The success by the achievement of the desired therapeutic effect of a PDT procedure relies on the accurate photosensitizer (PS) concentration distribution in tissues and on the homogeneous light delivery. To resolve the last issue in presence of the variability in target geometries (volume, elastic, solid, hollow organs and cavities), we propose a novel approach based on the light distribution modeling combined with spatial localization of the light applicator and real time display of the applied dose using computed tomogra-phy (CT) images. CT scans of the thorax cavity are acquired before the surgery to construct the thorax cavity. Fiducial markers consisting of 5 mm diameter capsule filled with paraffin oil are attached to the patient around the region to be imaged. A spatial registration is applied to compute a transformation between the patient position in the operating room and the images. The light distribution profile around the diffusing tip of the light applicator was characterized by two complementary methods: direct measurements of the light power using sensors and dose distribution characterization using a light sensitive camera. This model takes into account the absorption and the diffusion around the applicator. For the real time localiza-tion of the light applicator, an electromagnetic 3D tracking device is used to track the applicator movements. This tracking system is composed of a control unit with plugs to connect a transmitter and up to 4 six degrees-of-freedom sensors. By combining the model and the positions, a complete 3D light dose distribution is estimated and displayed on the CT images. The validation of the approach is realized in the conditions of a protocol of malignant pleural mesothelioma treatment. To compare and evaluate our estimated light dose, we operate direct measurements of the light power, as it was done in the work by Zhu et al. [1], using sensors that consist of isotropic probes able of collecting lights from different direction. All them are connected to a dosimetry system composed of an optical multiplexer, an optical power-meter, and a home-made software. Preliminary experiments of the method are conducted on a thorax phantom. The surface of the chest wall of the phantom was 1270 cm 2. With a laser emitting at 3 W, the treatment was performed for 10 nm. As results, differences less than 10% were observed between the measured values and the model based estimations. Reference [1] T.Show less >
Show more >Photodynamic therapy (PDT) is an emerging technic in oncology. The success by the achievement of the desired therapeutic effect of a PDT procedure relies on the accurate photosensitizer (PS) concentration distribution in tissues and on the homogeneous light delivery. To resolve the last issue in presence of the variability in target geometries (volume, elastic, solid, hollow organs and cavities), we propose a novel approach based on the light distribution modeling combined with spatial localization of the light applicator and real time display of the applied dose using computed tomogra-phy (CT) images. CT scans of the thorax cavity are acquired before the surgery to construct the thorax cavity. Fiducial markers consisting of 5 mm diameter capsule filled with paraffin oil are attached to the patient around the region to be imaged. A spatial registration is applied to compute a transformation between the patient position in the operating room and the images. The light distribution profile around the diffusing tip of the light applicator was characterized by two complementary methods: direct measurements of the light power using sensors and dose distribution characterization using a light sensitive camera. This model takes into account the absorption and the diffusion around the applicator. For the real time localiza-tion of the light applicator, an electromagnetic 3D tracking device is used to track the applicator movements. This tracking system is composed of a control unit with plugs to connect a transmitter and up to 4 six degrees-of-freedom sensors. By combining the model and the positions, a complete 3D light dose distribution is estimated and displayed on the CT images. The validation of the approach is realized in the conditions of a protocol of malignant pleural mesothelioma treatment. To compare and evaluate our estimated light dose, we operate direct measurements of the light power, as it was done in the work by Zhu et al. [1], using sensors that consist of isotropic probes able of collecting lights from different direction. All them are connected to a dosimetry system composed of an optical multiplexer, an optical power-meter, and a home-made software. Preliminary experiments of the method are conducted on a thorax phantom. The surface of the chest wall of the phantom was 1270 cm 2. With a laser emitting at 3 W, the treatment was performed for 10 nm. As results, differences less than 10% were observed between the measured values and the model based estimations. Reference [1] T.Show less >
Language :
Anglais
Popular science :
Non
Source :
Files
- https://hal.archives-ouvertes.fr/hal-01715062/document
- Open access
- Access the document
- https://hal.archives-ouvertes.fr/hal-01715062/document
- Open access
- Access the document
- https://hal.archives-ouvertes.fr/hal-01715062/document
- Open access
- Access the document
- document
- Open access
- Access the document
- Bensoltana_Real-time%20light%20dosimetry%20for%20intra-cavity_Nancy_2016%20%281%29.pdf
- Open access
- Access the document