Titre :

Poly(isosorbide carbonate): A ‘green’ char forming agent in polybutylene succinate intumescent formulation

Auteur(s) :

Hu, Chi [Auteur]
Unité Matériaux et Transformations - UMR 8207 [UMET]
Bourbigot, Serge [Auteur]
Unité Matériaux et Transformations - UMR 8207 [UMET]
Delaunay, Thierry [Auteur]
Collinet, Marion [Auteur]
Marcille, Sophie [Auteur]
Fontaine, Gaelle [Auteur correspondant]
Unité Matériaux et Transformations - UMR 8207 [UMET]
Laboratoire de structures et propriétés de l'état solide [LSPES]

Titre de la revue :

Composites Part B: Engineering

Nom court de la revue :

Composites Part B: Engineering

Numéro :

184

Pagination :

107675

Éditeur :

Elsevier BV

Date de publication :

2019-12

ISSN :

1359-8368

Discipline(s) HAL :

Chimie/Matériaux
Chimie/Polymères

Résumé en anglais : [en]

A new flame retardant (FR) intumescent system for polybutylene succinate (PBS) was developed using poly(isosorbide carbonate) (PIC), a bio-based polymer, as a ‘green’ char forming agent. The use of this charring agent in ...
Lire la suite >A new flame retardant (FR) intumescent system for polybutylene succinate (PBS) was developed using poly(isosorbide carbonate) (PIC), a bio-based polymer, as a ‘green’ char forming agent. The use of this charring agent in PBS/ammonium polyphosphate (APP) permits to obtain better efficiency than PBS/APP alone for mass loss cone calorimetry (MLC) test: pHRR was decreased by 24% vs 19%, THR was decreased by 48% vs 25% and the yield of residue was increased to 44% vs 23% respectively. According to the temperature measured by thermocouples embedded in the sample, the char formed for PBS/PIC/APP showed a better heat barrier effect than that of PBS/APP: under the char, the temperature and the heating rate of PBS/PIC/APP is significantly lower than those of PBS/APP. Obvious differences of the chemical composition and the morphology of the chars highlight that the good results obtained for PBS/PIC/APP were governed by a glass type char formed during the MLC test.Lire moins >

Langue :

Anglais

Comité de lecture :

Oui

Audience :

Non spécifiée

Établissement(s) :

Université de Lille
CNRS
INRA
ENSCL

Collections :

• Unité Matériaux et Transformations (UMET) - UMR 8207

Équipe(s) de recherche :

Ingénierie des Systèmes Polymères

Date de dépôt :

2020-02-07T07:08:31Z
2020-03-16T09:16:43Z