Two-phase reservoir: development of a ...
Document type :
Compte-rendu et recension critique d'ouvrage
Title :
Two-phase reservoir: development of a transient thermo-hydraulic model based on bond graph approach with experimental validation
Author(s) :
Kebdani, Mohamed [Auteur]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dauphin-Tanguy, Geneviève [Auteur]
Centrale Lille
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dazin, Antoine [Auteur]
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Albach, Roni [Auteur]
Dupont, Patrick [Inventeur (brevet)]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dauphin-Tanguy, Geneviève [Auteur]
Centrale Lille
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dazin, Antoine [Auteur]
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Albach, Roni [Auteur]
Dupont, Patrick [Inventeur (brevet)]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Journal title :
Mathematical and Computer Modelling of Dynamical Systems
Publisher :
Taylor & Francis
Publication date :
2016-11-28
ISSN :
1387-3954
English keyword(s) :
Bond graph
two-phase flow
dynamic
transient
heat transfer coefficient
convection
conduction
cooling loop
modelling
Pressurizer
two-phase flow
dynamic
transient
heat transfer coefficient
convection
conduction
cooling loop
modelling
Pressurizer
HAL domain(s) :
Sciences de l'ingénieur [physics]/Milieux fluides et réactifs
Mathématiques [math]/Physique mathématique [math-ph]
Mathématiques [math]/Analyse numérique [math.NA]
Physique [physics]/Mécanique [physics]/Génie mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des fluides [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des matériaux [physics.class-ph]
Physique [physics]/Mécanique [physics]/Matériaux et structures en mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Thermique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Vibrations [physics.class-ph]
Mathématiques [math]/Physique mathématique [math-ph]
Mathématiques [math]/Analyse numérique [math.NA]
Physique [physics]/Mécanique [physics]/Génie mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des fluides [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des matériaux [physics.class-ph]
Physique [physics]/Mécanique [physics]/Matériaux et structures en mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Thermique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Vibrations [physics.class-ph]
English abstract : [en]
The main purpose of the project FUI THERMOFLUID is to study the feasibility of a new electronic cooling system embedded on flying objects (missile, satellite, and airplane). The technology chosen consists of a pumped ...
Show more >The main purpose of the project FUI THERMOFLUID is to study the feasibility of a new electronic cooling system embedded on flying objects (missile, satellite, and airplane). The technology chosen consists of a pumped two-phase flow cooling loop (PTPFL). It is an innovativetechnology with a transport capacity of the thermal power up to 10 MW.m, exceeding in this way the performance of all other technologies. A PTPFL is a cooling loop based on the exploitation of the latent heat properties of the fluid trapped inside the loop, and moved by a pump. The components constituting a PTPFL are: a two-phase reservoir (TP-R), a mini-channels evaporator, a brazed plate condenser, a pump, and pipes.The global research work is devoted to propose a dynamic model and experimental validation of the PTPFL. The present article is exclusivelydedicated to the TP-R. Indeed, this element plays a key role in the functioning of PTPFL. Historically, the TP-R did not equip the first coolingloop. However, due to its advantages, its introduction was essential. The developed dynamic model will be used in another work to predict thethermal hydraulic efficiency of the PTPFL from its mechanical and fluidic parameters, to conduct the study of transitional regimes and instabilityproblems, and provides an original tool dedicated to design the TP-R in function of the thermal power levels to be evacuated and the selectedrefrigerant. The bond graph methodology is adopted for modelling works because of its energetic approach and multi-physics character ofthe studied system. The new model proposed in this article has many originalities: First, it is based on bond graph approach. Nowadays, theopen literature shows that no bond graph model has been developed for such thermo-fluid system. Second, the dynamic model of TP-R paysgreat attention to phenomena that have never been taken into account in works cited in the present article, such as evaporation and condensation.Third, different conducto-convective heat exchanges are modelled without any experimental recalibration of the thermal exchange coefficients,unlike models proposed in the literature. In fact, all coefficients are systematically calculated using adequate correlations.Show less >
Show more >The main purpose of the project FUI THERMOFLUID is to study the feasibility of a new electronic cooling system embedded on flying objects (missile, satellite, and airplane). The technology chosen consists of a pumped two-phase flow cooling loop (PTPFL). It is an innovativetechnology with a transport capacity of the thermal power up to 10 MW.m, exceeding in this way the performance of all other technologies. A PTPFL is a cooling loop based on the exploitation of the latent heat properties of the fluid trapped inside the loop, and moved by a pump. The components constituting a PTPFL are: a two-phase reservoir (TP-R), a mini-channels evaporator, a brazed plate condenser, a pump, and pipes.The global research work is devoted to propose a dynamic model and experimental validation of the PTPFL. The present article is exclusivelydedicated to the TP-R. Indeed, this element plays a key role in the functioning of PTPFL. Historically, the TP-R did not equip the first coolingloop. However, due to its advantages, its introduction was essential. The developed dynamic model will be used in another work to predict thethermal hydraulic efficiency of the PTPFL from its mechanical and fluidic parameters, to conduct the study of transitional regimes and instabilityproblems, and provides an original tool dedicated to design the TP-R in function of the thermal power levels to be evacuated and the selectedrefrigerant. The bond graph methodology is adopted for modelling works because of its energetic approach and multi-physics character ofthe studied system. The new model proposed in this article has many originalities: First, it is based on bond graph approach. Nowadays, theopen literature shows that no bond graph model has been developed for such thermo-fluid system. Second, the dynamic model of TP-R paysgreat attention to phenomena that have never been taken into account in works cited in the present article, such as evaporation and condensation.Third, different conducto-convective heat exchanges are modelled without any experimental recalibration of the thermal exchange coefficients,unlike models proposed in the literature. In fact, all coefficients are systematically calculated using adequate correlations.Show less >
Language :
Anglais
Popular science :
Non
Collections :
Source :
Files
- https://hal.archives-ouvertes.fr/hal-01445833/document
- Open access
- Access the document
- https://hal.archives-ouvertes.fr/hal-01445833/document
- Open access
- Access the document
- https://hal.archives-ouvertes.fr/hal-01445833/document
- Open access
- Access the document
- document
- Open access
- Access the document
- PRESSURIZER_MCMDS_JOURNAL__KEBDANI_Mohamed.pdf
- Open access
- Access the document