Two-phase reservoir: development of a ...
Type de document :
Compte-rendu et recension critique d'ouvrage
Titre :
Two-phase reservoir: development of a transient thermo-hydraulic model based on bond graph approach with experimental validation
Auteur(s) :
Kebdani, Mohamed [Auteur]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dauphin-Tanguy, Geneviève [Auteur]
Centrale Lille
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dazin, Antoine [Auteur]
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Albach, Roni [Auteur]
Dupont, Patrick [Inventeur (brevet)]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dauphin-Tanguy, Geneviève [Auteur]
Centrale Lille
Centre de Recherche en Informatique, Signal et Automatique de Lille - UMR 9189 [CRIStAL]
LAGIS-MOCIS
Dazin, Antoine [Auteur]
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Albach, Roni [Auteur]
Dupont, Patrick [Inventeur (brevet)]
Centrale Lille
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
Titre de la revue :
Mathematical and Computer Modelling of Dynamical Systems
Éditeur :
Taylor & Francis
Date de publication :
2016-11-28
ISSN :
1387-3954
Mot(s)-clé(s) en anglais :
Bond graph
two-phase flow
dynamic
transient
heat transfer coefficient
convection
conduction
cooling loop
modelling
Pressurizer
two-phase flow
dynamic
transient
heat transfer coefficient
convection
conduction
cooling loop
modelling
Pressurizer
Discipline(s) HAL :
Sciences de l'ingénieur [physics]/Milieux fluides et réactifs
Mathématiques [math]/Physique mathématique [math-ph]
Mathématiques [math]/Analyse numérique [math.NA]
Physique [physics]/Mécanique [physics]/Génie mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des fluides [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des matériaux [physics.class-ph]
Physique [physics]/Mécanique [physics]/Matériaux et structures en mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Thermique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Vibrations [physics.class-ph]
Mathématiques [math]/Physique mathématique [math-ph]
Mathématiques [math]/Analyse numérique [math.NA]
Physique [physics]/Mécanique [physics]/Génie mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des fluides [physics.class-ph]
Physique [physics]/Mécanique [physics]/Mécanique des matériaux [physics.class-ph]
Physique [physics]/Mécanique [physics]/Matériaux et structures en mécanique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Thermique [physics.class-ph]
Physique [physics]/Mécanique [physics]/Vibrations [physics.class-ph]
Résumé en anglais : [en]
The main purpose of the project FUI THERMOFLUID is to study the feasibility of a new electronic cooling system embedded on flying objects (missile, satellite, and airplane). The technology chosen consists of a pumped ...
Lire la suite >The main purpose of the project FUI THERMOFLUID is to study the feasibility of a new electronic cooling system embedded on flying objects (missile, satellite, and airplane). The technology chosen consists of a pumped two-phase flow cooling loop (PTPFL). It is an innovativetechnology with a transport capacity of the thermal power up to 10 MW.m, exceeding in this way the performance of all other technologies. A PTPFL is a cooling loop based on the exploitation of the latent heat properties of the fluid trapped inside the loop, and moved by a pump. The components constituting a PTPFL are: a two-phase reservoir (TP-R), a mini-channels evaporator, a brazed plate condenser, a pump, and pipes.The global research work is devoted to propose a dynamic model and experimental validation of the PTPFL. The present article is exclusivelydedicated to the TP-R. Indeed, this element plays a key role in the functioning of PTPFL. Historically, the TP-R did not equip the first coolingloop. However, due to its advantages, its introduction was essential. The developed dynamic model will be used in another work to predict thethermal hydraulic efficiency of the PTPFL from its mechanical and fluidic parameters, to conduct the study of transitional regimes and instabilityproblems, and provides an original tool dedicated to design the TP-R in function of the thermal power levels to be evacuated and the selectedrefrigerant. The bond graph methodology is adopted for modelling works because of its energetic approach and multi-physics character ofthe studied system. The new model proposed in this article has many originalities: First, it is based on bond graph approach. Nowadays, theopen literature shows that no bond graph model has been developed for such thermo-fluid system. Second, the dynamic model of TP-R paysgreat attention to phenomena that have never been taken into account in works cited in the present article, such as evaporation and condensation.Third, different conducto-convective heat exchanges are modelled without any experimental recalibration of the thermal exchange coefficients,unlike models proposed in the literature. In fact, all coefficients are systematically calculated using adequate correlations.Lire moins >
Lire la suite >The main purpose of the project FUI THERMOFLUID is to study the feasibility of a new electronic cooling system embedded on flying objects (missile, satellite, and airplane). The technology chosen consists of a pumped two-phase flow cooling loop (PTPFL). It is an innovativetechnology with a transport capacity of the thermal power up to 10 MW.m, exceeding in this way the performance of all other technologies. A PTPFL is a cooling loop based on the exploitation of the latent heat properties of the fluid trapped inside the loop, and moved by a pump. The components constituting a PTPFL are: a two-phase reservoir (TP-R), a mini-channels evaporator, a brazed plate condenser, a pump, and pipes.The global research work is devoted to propose a dynamic model and experimental validation of the PTPFL. The present article is exclusivelydedicated to the TP-R. Indeed, this element plays a key role in the functioning of PTPFL. Historically, the TP-R did not equip the first coolingloop. However, due to its advantages, its introduction was essential. The developed dynamic model will be used in another work to predict thethermal hydraulic efficiency of the PTPFL from its mechanical and fluidic parameters, to conduct the study of transitional regimes and instabilityproblems, and provides an original tool dedicated to design the TP-R in function of the thermal power levels to be evacuated and the selectedrefrigerant. The bond graph methodology is adopted for modelling works because of its energetic approach and multi-physics character ofthe studied system. The new model proposed in this article has many originalities: First, it is based on bond graph approach. Nowadays, theopen literature shows that no bond graph model has been developed for such thermo-fluid system. Second, the dynamic model of TP-R paysgreat attention to phenomena that have never been taken into account in works cited in the present article, such as evaporation and condensation.Third, different conducto-convective heat exchanges are modelled without any experimental recalibration of the thermal exchange coefficients,unlike models proposed in the literature. In fact, all coefficients are systematically calculated using adequate correlations.Lire moins >
Langue :
Anglais
Vulgarisation :
Non
Collections :
Source :
Fichiers
- https://hal.archives-ouvertes.fr/hal-01445833/document
- Accès libre
- Accéder au document
- https://hal.archives-ouvertes.fr/hal-01445833/document
- Accès libre
- Accéder au document
- https://hal.archives-ouvertes.fr/hal-01445833/document
- Accès libre
- Accéder au document
- document
- Accès libre
- Accéder au document
- PRESSURIZER_MCMDS_JOURNAL__KEBDANI_Mohamed.pdf
- Accès libre
- Accéder au document