Safe(r) by design implementation in the ...
Document type :
Article dans une revue scientifique: Article original
Permalink :
Title :
Safe(r) by design implementation in the nanotechnology industry
Author(s) :
Jimenez, Araceli Sanchez [Auteur]
Puelles, Raquel [Auteur]
Perez-Fernandez, Marta [Auteur]
Gomez-Fernandez, Paloma [Auteur]
Barruetabena, Leire [Auteur]
Jacobsen, Nicklas Raun [Auteur]
Suarez-Merino, Blanca [Auteur]
Micheletti, Christian [Auteur]
Manier, Nicolas [Auteur]
Institut National de l'Environnement Industriel et des Risques [INERIS]
Trouiller, Benedicte [Auteur]
Institut National de l'Environnement Industriel et des Risques [INERIS]
Maria, Navas Jose [Auteur]
Kalman, Judit [Auteur]
Salieri, Beatrice [Auteur]
Hischier, Roland [Auteur]
Handzhiyski, Yordan [Auteur]
Apostolova, Margarita D. [Auteur]
Hadrup, Niels [Auteur]
Bouillard, Jacques [Auteur]
Oudart, Yohan [Auteur]
Merino, Cesar [Auteur]
Garcia, Erika [Auteur]
Liguori, Biase [Auteur]
Sabella, Stefania [Auteur]
Rose, Jerome [Auteur]
Centre Européen de Recherche et d'Enseignement des Géosciences de l'Environnement [CEREGE]
Masion, Armand [Auteur]
Centre Européen de Recherche et d'Enseignement des Géosciences de l'Environnement [CEREGE]
Galea, Karen S. [Auteur]
Stepankova, Sandra [Auteur]
Mouneyrac, Catherine [Auteur]
Mer, molécules et santé [MMS UCO]
Barrick, Andrew [Auteur]
Mer, molécules et santé EA 2160 [MMS]
Université Catholique de l'Ouest [UCO]
Chatel, Amelie [Auteur]
Mer, molécules et santé EA 2160 [MMS]
Dusinska, Maria [Auteur]
Runden-Pran, Elise [Auteur]
Mariussen, Espen [Auteur]
Bressot, Christophe [Auteur]
Aguerre-Chariol, Olivier [Auteur]
Shandilya, Neeraj [Auteur]
Goede, Henk [Auteur]
Gomez-Cordon, Julio [Auteur]
Simar, Sophie [Auteur]
Impact de l'environnement chimique sur la santé humaine - ULR 4483 [IMPECS]
Nesslany, Fabrice [Auteur]
IMPact de l'Environnement Chimique sur la Santé humaine (IMPECS) - ULR 4483
Jensen, Keld Alstrup [Auteur]
Van Tongeren, Martie [Auteur]
Llopis, Isabel Rodriguez [Auteur]
Puelles, Raquel [Auteur]
Perez-Fernandez, Marta [Auteur]
Gomez-Fernandez, Paloma [Auteur]
Barruetabena, Leire [Auteur]
Jacobsen, Nicklas Raun [Auteur]
Suarez-Merino, Blanca [Auteur]
Micheletti, Christian [Auteur]
Manier, Nicolas [Auteur]
Institut National de l'Environnement Industriel et des Risques [INERIS]
Trouiller, Benedicte [Auteur]
Institut National de l'Environnement Industriel et des Risques [INERIS]
Maria, Navas Jose [Auteur]
Kalman, Judit [Auteur]
Salieri, Beatrice [Auteur]
Hischier, Roland [Auteur]
Handzhiyski, Yordan [Auteur]
Apostolova, Margarita D. [Auteur]
Hadrup, Niels [Auteur]
Bouillard, Jacques [Auteur]
Oudart, Yohan [Auteur]
Merino, Cesar [Auteur]
Garcia, Erika [Auteur]
Liguori, Biase [Auteur]
Sabella, Stefania [Auteur]
Rose, Jerome [Auteur]
Centre Européen de Recherche et d'Enseignement des Géosciences de l'Environnement [CEREGE]
Masion, Armand [Auteur]
Centre Européen de Recherche et d'Enseignement des Géosciences de l'Environnement [CEREGE]
Galea, Karen S. [Auteur]
Stepankova, Sandra [Auteur]
Mouneyrac, Catherine [Auteur]
Mer, molécules et santé [MMS UCO]
Barrick, Andrew [Auteur]
Mer, molécules et santé EA 2160 [MMS]
Université Catholique de l'Ouest [UCO]
Chatel, Amelie [Auteur]
Mer, molécules et santé EA 2160 [MMS]
Dusinska, Maria [Auteur]
Runden-Pran, Elise [Auteur]
Mariussen, Espen [Auteur]
Bressot, Christophe [Auteur]
Aguerre-Chariol, Olivier [Auteur]
Shandilya, Neeraj [Auteur]
Goede, Henk [Auteur]
Gomez-Cordon, Julio [Auteur]
Simar, Sophie [Auteur]
Impact de l'environnement chimique sur la santé humaine - ULR 4483 [IMPECS]
Nesslany, Fabrice [Auteur]
IMPact de l'Environnement Chimique sur la Santé humaine (IMPECS) - ULR 4483
Jensen, Keld Alstrup [Auteur]
Van Tongeren, Martie [Auteur]
Llopis, Isabel Rodriguez [Auteur]
Journal title :
NanoImpact
Abbreviated title :
NanoImpact
Volume number :
20
Pages :
100267
Publisher :
Elsevier
Publication date :
2020-10-01
ISSN :
2452-0748
English keyword(s) :
Nano-enabled products
Nanotechnology
Nanoparticle
Life cycle assessment
Risk assessment
Safe by design
Nanomaterials
Nano-enabled products
Nanotechnology
Nanotechnology
Nanoparticle
Life cycle assessment
Risk assessment
Safe by design
Nanomaterials
Nano-enabled products
Nanotechnology
HAL domain(s) :
Sciences du Vivant [q-bio]
English abstract : [en]
The implementation of Safe(r) by Design (SbD) in industrial innovations requires an integrated approach where the human, environmental and economic impact of the SbD measures is evaluated across and throughout the nanomaterial ...
Show more >The implementation of Safe(r) by Design (SbD) in industrial innovations requires an integrated approach where the human, environmental and economic impact of the SbD measures is evaluated across and throughout the nanomaterial (NM) life cycle. SbD was implemented in six industrial companies where SbD measures were applied to NMs, nano-enabled products (NEPs) and NM/NEP manufacturing processes. The approach considers human and environmental risks, functionality of the NM/NEP and costs as early as possible in the innovation process, continuing throughout the innovation progresses. Based on the results of the evaluation, a decision has to be made on whether to continue, stop or re-design the NM/NEP/process or to carry out further tests/obtain further data in cases where the uncertainty of the human and environmental risks is too large. However, SbD can also be implemented at later stages when there is already a prototype product or process available, as demonstrated in some of the cases. The SbD measures implemented in some of the case studies did not result in a viable solution. For example the coating of silicon nanoparticles with amorphous carbon increased the conductivity, the stability and reduced the dustiness of the particles and therefore the risk of explosion and the exposure to workers. However the socioeconomic assessment for their use in lithium-ion batteries for cars, when compared to the use of graphite, showed that the increase in performance did not overcome the higher production costs. This work illustrates the complexities of selecting the most appropriate SbD measures and highlights that SbD cannot be solely based on a hazard and exposure assessment but must include other impacts that any SbD measures may have on sustainability including energy consumption and waste generation as well as all associated monetary costs.Show less >
Show more >The implementation of Safe(r) by Design (SbD) in industrial innovations requires an integrated approach where the human, environmental and economic impact of the SbD measures is evaluated across and throughout the nanomaterial (NM) life cycle. SbD was implemented in six industrial companies where SbD measures were applied to NMs, nano-enabled products (NEPs) and NM/NEP manufacturing processes. The approach considers human and environmental risks, functionality of the NM/NEP and costs as early as possible in the innovation process, continuing throughout the innovation progresses. Based on the results of the evaluation, a decision has to be made on whether to continue, stop or re-design the NM/NEP/process or to carry out further tests/obtain further data in cases where the uncertainty of the human and environmental risks is too large. However, SbD can also be implemented at later stages when there is already a prototype product or process available, as demonstrated in some of the cases. The SbD measures implemented in some of the case studies did not result in a viable solution. For example the coating of silicon nanoparticles with amorphous carbon increased the conductivity, the stability and reduced the dustiness of the particles and therefore the risk of explosion and the exposure to workers. However the socioeconomic assessment for their use in lithium-ion batteries for cars, when compared to the use of graphite, showed that the increase in performance did not overcome the higher production costs. This work illustrates the complexities of selecting the most appropriate SbD measures and highlights that SbD cannot be solely based on a hazard and exposure assessment but must include other impacts that any SbD measures may have on sustainability including energy consumption and waste generation as well as all associated monetary costs.Show less >
Language :
Anglais
Peer reviewed article :
Oui
Audience :
Internationale
Popular science :
Non
Administrative institution(s) :
CHU Lille
Institut Pasteur de Lille
Université de Lille
Institut Pasteur de Lille
Université de Lille
Submission date :
2022-02-02T10:24:45Z
2024-02-14T08:40:41Z
2024-04-19T15:42:12Z
2024-02-14T08:40:41Z
2024-04-19T15:42:12Z