Optimization of the inverted perovskite ...
Document type :
Article dans une revue scientifique: Article original
Permalink :
Title :
Optimization of the inverted perovskite CH3NH3PbI3 planar heterojunction for solar cells applications
Author(s) :
Kemouche, M. [Auteur]
Aissat, A. [Auteur]
Faculté De Technologie Blida1
Nacer, S. [Auteur]
Faculté De Technologie Blida1
Dupont, Samuel [Auteur]
INSA Institut National des Sciences Appliquées Hauts-de-France [INSA Hauts-De-France]
Optoélectronique - IEMN [OPTO - IEMN]
Université Polytechnique Hauts-de-France [UPHF]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Vilcot, Jean-Pierre [Auteur]
Optoélectronique - IEMN [OPTO - IEMN]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Aissat, A. [Auteur]
Faculté De Technologie Blida1
Nacer, S. [Auteur]
Faculté De Technologie Blida1
Dupont, Samuel [Auteur]

INSA Institut National des Sciences Appliquées Hauts-de-France [INSA Hauts-De-France]
Optoélectronique - IEMN [OPTO - IEMN]
Université Polytechnique Hauts-de-France [UPHF]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Vilcot, Jean-Pierre [Auteur]
Optoélectronique - IEMN [OPTO - IEMN]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Journal title :
Journal of Ovonic Research
Pages :
667-680
Publication date :
2024-10
ISSN :
1584-9953
English keyword(s) :
Materials
Perovskite
Defect density
Solar cell
Photovoltaic
Optoelectronics
Perovskite
Defect density
Solar cell
Photovoltaic
Optoelectronics
HAL domain(s) :
Physique [physics]
Sciences de l'ingénieur [physics]
Sciences de l'ingénieur [physics]
English abstract : [en]
The purpose of our paper is to simulate and optimize the electro-optical characteristics of a reversed Perovskite planar solar cell. Firstly, the synthesis of the CH3NH3PbI3 was exposed. Then, the absorption, reflection ...
Show more >The purpose of our paper is to simulate and optimize the electro-optical characteristics of a reversed Perovskite planar solar cell. Firstly, the synthesis of the CH3NH3PbI3 was exposed. Then, the absorption, reflection and transmission phenomena were studied. The effects of the thicknesses of CH3NH3PbI (d) and HTL (D) layers on the efficiency of the presented have been simulated. Subsequently, the back contact metals effect on Jsc, Voc, FF and η was taken into account. For a thickness d=0.6µm, the output parameters reached Voc=1.07V, Jsc=22.75mA/cm2 , FF=78% and η=19.02%. Besides, the efficiency is reduced by the defect density at the CH3NH3PbI3/PEDOT:PSS interface more than that at the PCBM/CH3NH3PbI3 interface and it should be less than 1013 cm-3 to have better solar cell performance.Show less >
Show more >The purpose of our paper is to simulate and optimize the electro-optical characteristics of a reversed Perovskite planar solar cell. Firstly, the synthesis of the CH3NH3PbI3 was exposed. Then, the absorption, reflection and transmission phenomena were studied. The effects of the thicknesses of CH3NH3PbI (d) and HTL (D) layers on the efficiency of the presented have been simulated. Subsequently, the back contact metals effect on Jsc, Voc, FF and η was taken into account. For a thickness d=0.6µm, the output parameters reached Voc=1.07V, Jsc=22.75mA/cm2 , FF=78% and η=19.02%. Besides, the efficiency is reduced by the defect density at the CH3NH3PbI3/PEDOT:PSS interface more than that at the PCBM/CH3NH3PbI3 interface and it should be less than 1013 cm-3 to have better solar cell performance.Show less >
Language :
Anglais
Peer reviewed article :
Oui
Audience :
Internationale
Popular science :
Non
Source :
Submission date :
2025-01-23T09:25:31Z