A Damage Criterion to Predict the Fatigue ...
Type de document :
Article dans une revue scientifique: Article original
DOI :
URL permanente :
Titre :
A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements
Auteur(s) :
Drumond, Geovana [Auteur]
Roudet, Francine [Auteur]
Chicot, Didier [Auteur]
Laboratoire de Génie Civil et Géo-Environnement (LGCgE) - ULR 4515 [LGCgE]
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
PINHEIRO, BIANCA [Auteur]
Pasqualino, Ilson [Auteur]
Roudet, Francine [Auteur]
Chicot, Didier [Auteur]

Laboratoire de Génie Civil et Géo-Environnement (LGCgE) - ULR 4515 [LGCgE]
Laboratoire de Mécanique de Lille - FRE 3723 [LML]
PINHEIRO, BIANCA [Auteur]
Pasqualino, Ilson [Auteur]
Titre de la revue :
Journal of Offshore Mechanics and Arctic Engineering
Éditeur :
American Society of Mechanical Engineers
Date de publication :
2021-02-01
ISSN :
0892-7219
Discipline(s) HAL :
Sciences de l'ingénieur [physics]
Résumé en anglais : [en]
Abstract A study was conducted to investigate the effects of surface microhardness on different phases of fatigue damage. This helps to estimate the evolution of the material resistance from microplastic distortions and ...
Lire la suite >Abstract A study was conducted to investigate the effects of surface microhardness on different phases of fatigue damage. This helps to estimate the evolution of the material resistance from microplastic distortions and gives pertinent data about cumulated fatigue damage. The objective of this work is to propose a damage criterion, associated with microstructural changes, to predict the fatigue life of steel structures submitted to cyclic loads before macroscopic cracking. Instrumented indentation tests (IIT) were conducted on test samples submitted to high cycle fatigue (HCF) loads. To evaluate the role of the microstructure initial state, the material was considered in two different conditions: as-received and annealed. It was observed that significant changes in the microhardness values happened at the surface and subsurface of the material, up to 2 µm of indentation depth, and around 21% and 7% of the fatigue life for as-received and annealed conditions, respectively. These percentages were identified as a critical period for microstructural changes, which was taken as a reference in a damage criterion to predict the number of cycles to fatigue failure (Nf) of a steel structure.Lire moins >
Lire la suite >Abstract A study was conducted to investigate the effects of surface microhardness on different phases of fatigue damage. This helps to estimate the evolution of the material resistance from microplastic distortions and gives pertinent data about cumulated fatigue damage. The objective of this work is to propose a damage criterion, associated with microstructural changes, to predict the fatigue life of steel structures submitted to cyclic loads before macroscopic cracking. Instrumented indentation tests (IIT) were conducted on test samples submitted to high cycle fatigue (HCF) loads. To evaluate the role of the microstructure initial state, the material was considered in two different conditions: as-received and annealed. It was observed that significant changes in the microhardness values happened at the surface and subsurface of the material, up to 2 µm of indentation depth, and around 21% and 7% of the fatigue life for as-received and annealed conditions, respectively. These percentages were identified as a critical period for microstructural changes, which was taken as a reference in a damage criterion to predict the number of cycles to fatigue failure (Nf) of a steel structure.Lire moins >
Langue :
Anglais
Comité de lecture :
Oui
Audience :
Internationale
Vulgarisation :
Non
Source :
Date de dépôt :
2025-02-26T11:02:02Z