Energy extraction performance improvement of a flapping foil by the use of combined foil

Boudis, Ali; Benzaoui, Ahmed; Oualli, H; Guerri, O; Bayeul-Lainé, Annie-Claude; Coutier-Delgosha, Olivier

Type de document :

Compte-rendu et recension critique d'ouvrage

DOI :

10.18869/acadpub.jafm.73.249.29099

Titre :

Energy extraction performance improvement of a flapping foil by the use of combined foil

Auteur(s) :

Boudis, Ali [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Benzaoui, Ahmed [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Oualli, H [Auteur]
École Militaire Polytechnique [Alger] [EMP]
Guerri, O [Auteur]
Centre de Développement des Energies Renouvelables [CDER]
Bayeul-Lainé, Annie-Claude [Auteur]
Laboratoire de Mécanique des Fluides de Lille - Kampé de Fériet [LMFL]
Coutier-Delgosha, Olivier [Auteur]
Virginia Tech [Blacksburg]

Titre de la revue :

Journal of Applied Fluid Mechanics

Pagination :

1651-1663

Éditeur :

Isfahan Isfahan University of Technology

Date de publication :

2018-01

ISSN :

1735-3572

Mot(s)-clé(s) en anglais :

Flapping foil
Energy extraction
Power coefficient
Combined foil
CFD

Discipline(s) HAL :

Sciences de l'ingénieur [physics]

Résumé en anglais : [en]

In this study, numerical investigations on the energy extraction performance of a flapping foil device are carried out by using a modified foil shape. The new foil shape is designed by combining the thick leading edge of ...
Lire la suite >In this study, numerical investigations on the energy extraction performance of a flapping foil device are carried out by using a modified foil shape. The new foil shape is designed by combining the thick leading edge of NACA0012 foil and the thin trailing edge of NACA0006 foil. The numerical simulations are based on the solution of the unsteady and incompressible Navier-Stokes equations that govern the fluid flow around the flapping foil. These equations are resolved in a two-dimensional domain with a dynamic mesh technique using the CFD software ANSYS Fluent 16. A User Define Function (UDF) controls the imposed sinusoidal heaving and pitching motions. First, for a validation study, numerical simulations are performed for a NACA0012 foil undergoing imposed heaving and pitching motions at a low Reynolds number. The obtained results are in good agreement with numerical and experimental data available in the literature. Thereafter, the computations are applied for the new foil shape. The influences of the connecting area location between the leading and trailing segments, the Strouhal number and the effective angle of attack on the energy extraction performance are investigated at low Reynolds number (Re = 10 000). Then, the new foil shape performance was compared to those of both NACA0006 and NACA0012 baseline foils. The results have shown that the proposed foil shape achieves higher performance compared to the baseline NACA foils. Moreover, the energy extraction efficiency was improved by 30.60% compared to NACA0006 and by 17.32% compared to NACA0012. The analysis of the flow field around the flapping foils indicates a change of the vortex structure and the pressure distribution near the trailing edge of the combined foil compared to the baseline foils.Lire moins >

Langue :

Anglais

Vulgarisation :

Non

Collections :