Enhanced corrosion resistance of mild steel ...
Document type :
Article dans une revue scientifique: Article original
Permalink :
Title :
Enhanced corrosion resistance of mild steel in normal sulfuric acid medium by 2,5-bis(n-thienyl)-1,3,4-thiadiazoles: Electrochemical, X-ray photoelectron spectroscopy and theoretical studies
Author(s) :
Lebrini, Mounim [Auteur]
Laboratoire de structures et propriétés de l'état solide - UMR 8008 [LSPES]
Lagrenée, Michel [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Traisnel, Michel [Auteur]
Laboratoire de structures et propriétés de l'état solide - UMR 8008 [LSPES]
Gengembre, Léon [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Vezin, Herve [Auteur]
Laboratoire de Chimie Organique et Macromoleculaire [UMR CNRS 8009]
Bentiss, Fouad [Auteur]
Laboratoire de structures et propriétés de l'état solide - UMR 8008 [LSPES]
Lagrenée, Michel [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Traisnel, Michel [Auteur]
Laboratoire de structures et propriétés de l'état solide - UMR 8008 [LSPES]
Gengembre, Léon [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Vezin, Herve [Auteur]

Laboratoire de Chimie Organique et Macromoleculaire [UMR CNRS 8009]
Bentiss, Fouad [Auteur]
Journal title :
Applied Surface Science
Volume number :
253
Pages :
9267-9276
Publisher :
Elsevier BV
Publication date :
2007-09
ISSN :
0169-4332
HAL domain(s) :
Chimie/Chimie théorique et/ou physique
English abstract : [en]
The inhibitive action of some thiadiazole derivatives, namely 2,5-bis(2-thienyl)-1,3,4-thiadiazole (2-TTH) and 2,5-bis(3-thienyl)-1,3,4-thiadiazole (3-TTH) against the corrosion of mild steel in 0.5 M H2SO4 solution has ...
Show more >The inhibitive action of some thiadiazole derivatives, namely 2,5-bis(2-thienyl)-1,3,4-thiadiazole (2-TTH) and 2,5-bis(3-thienyl)-1,3,4-thiadiazole (3-TTH) against the corrosion of mild steel in 0.5 M H2SO4 solution has been investigated using weight loss measurements, Tafel polarisation and electrochemical impedance spectroscopy (EIS) techniques. The experimental results obtained revealed that these compounds inhibited the steel corrosion in acid solution. The protection efficiency increased with increasing inhibitors concentration and the ability of the molecule to adsorb on the steel surface was dependent on the position of the sulphur atom on the thienyl substituent. Inhibition efficiency values obtained from various methods employed were in reasonable agreement. Potentiodynamic polarisation studies clearly showed that 2-TTH and 3-TTH acted as mixed inhibitors. Adsorption of these inhibitors on steel surface obeyed to Langmuir adsorption isotherm. X-ray photoelectron spectroscopy and the thermodynamic data of adsorption showed that inhibition of steel corrosion in normal sulphuric solution by n-TTH is due to the formation of a chemisorbed film on the steel surface. Molecular modelling was used to gain some insight, about structural and electronic effects in relation to the inhibiting efficiencies.Show less >
Show more >The inhibitive action of some thiadiazole derivatives, namely 2,5-bis(2-thienyl)-1,3,4-thiadiazole (2-TTH) and 2,5-bis(3-thienyl)-1,3,4-thiadiazole (3-TTH) against the corrosion of mild steel in 0.5 M H2SO4 solution has been investigated using weight loss measurements, Tafel polarisation and electrochemical impedance spectroscopy (EIS) techniques. The experimental results obtained revealed that these compounds inhibited the steel corrosion in acid solution. The protection efficiency increased with increasing inhibitors concentration and the ability of the molecule to adsorb on the steel surface was dependent on the position of the sulphur atom on the thienyl substituent. Inhibition efficiency values obtained from various methods employed were in reasonable agreement. Potentiodynamic polarisation studies clearly showed that 2-TTH and 3-TTH acted as mixed inhibitors. Adsorption of these inhibitors on steel surface obeyed to Langmuir adsorption isotherm. X-ray photoelectron spectroscopy and the thermodynamic data of adsorption showed that inhibition of steel corrosion in normal sulphuric solution by n-TTH is due to the formation of a chemisorbed film on the steel surface. Molecular modelling was used to gain some insight, about structural and electronic effects in relation to the inhibiting efficiencies.Show less >
Language :
Anglais
Peer reviewed article :
Oui
Audience :
Internationale
Popular science :
Non
Administrative institution(s) :
Université de Lille
CNRS
CNRS
Submission date :
2021-06-18T09:06:33Z
2021-10-08T12:32:50Z
2021-10-08T12:33:37Z
2021-10-08T12:32:50Z
2021-10-08T12:33:37Z