Quantitative assessment of the influence ...
Document type :
Article dans une revue scientifique: Article original
Permalink :
Title :
Quantitative assessment of the influence of the Portevin-Le Chatelier effect on the flow stress in precipitation hardening AlMgScZr alloys
Author(s) :
Chen, Han [Auteur]
Shanghai Jiao Tong University [Shanghai]
Chen, Yanchi [Auteur]
Shanghai Jiao Tong University [Shanghai]
Tang, Yifei [Auteur]
Shanghai Jiao Tong University [Shanghai]
Ji, Gang [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Bréchet, Yves [Auteur]
Shanghai Jiao Tong University [Shanghai]
Monash University [Clayton]
Zhong, Shengyi [Auteur]
Shanghai Jiao Tong University [Shanghai]
Wang, Haowei [Auteur]
Shanghai Jiao Tong University [Shanghai]
Yan, Guanyun [Auteur]
China Academy of Engineering Physics [CAEP]
Chen, Zhe [Auteur]
Shanghai Jiao Tong University [Shanghai]
Shanghai Jiao Tong University [Shanghai]
Chen, Yanchi [Auteur]
Shanghai Jiao Tong University [Shanghai]
Tang, Yifei [Auteur]
Shanghai Jiao Tong University [Shanghai]
Ji, Gang [Auteur]

Unité Matériaux et Transformations (UMET) - UMR 8207
Bréchet, Yves [Auteur]
Shanghai Jiao Tong University [Shanghai]
Monash University [Clayton]
Zhong, Shengyi [Auteur]
Shanghai Jiao Tong University [Shanghai]
Wang, Haowei [Auteur]
Shanghai Jiao Tong University [Shanghai]
Yan, Guanyun [Auteur]
China Academy of Engineering Physics [CAEP]
Chen, Zhe [Auteur]
Shanghai Jiao Tong University [Shanghai]
Journal title :
ACTA MATERIALIA
Abbreviated title :
Acta Materialia
Volume number :
255
Pages :
119060
Publisher :
Elsevier BV
Publication date :
2023-06
ISSN :
1359-6454
English keyword(s) :
Portevin-Le Chatelier effect
Flow stress
Precipitates
Dislocations
Modeling
Flow stress
Precipitates
Dislocations
Modeling
HAL domain(s) :
Chimie/Matériaux
Physique [physics]/Matière Condensée [cond-mat]/Science des matériaux [cond-mat.mtrl-sci]
Physique [physics]/Matière Condensée [cond-mat]/Science des matériaux [cond-mat.mtrl-sci]
English abstract : [en]
Portevin-Le Chatelier (PLC) effect often occurs in many alloy systems and leads to flow stress variations. When precipitation occurs, the PLC behavior changes and its resultant influence on the flow stress becomes more ...
Show more >Portevin-Le Chatelier (PLC) effect often occurs in many alloy systems and leads to flow stress variations. When precipitation occurs, the PLC behavior changes and its resultant influence on the flow stress becomes more complicated, which has not yet been clarified. The well-known interaction mechanisms between precipitates and dislocations are shearing (shearable precipitates) and bypassing (non-shearable precipitates). This study systematically investigates the influence of the PLC effect on the flow stress in three cases, namely, without precipitates, with shearable precipitates, and with non-shearable precipitates. This study is performed on a AlMgZrSc alloy, where the precipitation does not change the concentration of solute species that is responsible for PLC. A modified constitutive relationship considering different dislocation-precipitate interactions is proposed, which can quantify the contribution of the PLC effect to the flow stress in the above three cases. The modeling results agree well with those of experiments performed on AlMg and AlMgScZr alloys exhibiting the PLC effect. It is theoretically demonstrated that PLC-induced strengthening can account for as much as 14.5% of the total flow stress in AlMg alloys. When shearable and non-shearable precipitates appear, this percentage decreases to approximately 4.5% and 9.5%, respectively, indicating that the precipitates weaken PLC-induced strengthening. Moreover, shearable precipitates can shorten the strain rate range of PLC, which is more effective in suppressing the PLC effect than non-shearable precipitates. Finally, the intrinsic mechanism responsible for the PLC-induced strengthening and roles of different precipitate-dislocation interactions are discussed.Show less >
Show more >Portevin-Le Chatelier (PLC) effect often occurs in many alloy systems and leads to flow stress variations. When precipitation occurs, the PLC behavior changes and its resultant influence on the flow stress becomes more complicated, which has not yet been clarified. The well-known interaction mechanisms between precipitates and dislocations are shearing (shearable precipitates) and bypassing (non-shearable precipitates). This study systematically investigates the influence of the PLC effect on the flow stress in three cases, namely, without precipitates, with shearable precipitates, and with non-shearable precipitates. This study is performed on a AlMgZrSc alloy, where the precipitation does not change the concentration of solute species that is responsible for PLC. A modified constitutive relationship considering different dislocation-precipitate interactions is proposed, which can quantify the contribution of the PLC effect to the flow stress in the above three cases. The modeling results agree well with those of experiments performed on AlMg and AlMgScZr alloys exhibiting the PLC effect. It is theoretically demonstrated that PLC-induced strengthening can account for as much as 14.5% of the total flow stress in AlMg alloys. When shearable and non-shearable precipitates appear, this percentage decreases to approximately 4.5% and 9.5%, respectively, indicating that the precipitates weaken PLC-induced strengthening. Moreover, shearable precipitates can shorten the strain rate range of PLC, which is more effective in suppressing the PLC effect than non-shearable precipitates. Finally, the intrinsic mechanism responsible for the PLC-induced strengthening and roles of different precipitate-dislocation interactions are discussed.Show less >
Language :
Anglais
Audience :
Internationale
Popular science :
Non
Administrative institution(s) :
Université de Lille
CNRS
INRAE
ENSCL
CNRS
INRAE
ENSCL
Collections :
Research team(s) :
Métallurgie Physique et Génie des Matériaux
Submission date :
2023-06-10T14:05:14Z
2023-06-16T09:36:55Z
2023-06-16T09:36:55Z