Liquid Phase Furfural Oxidation under ...
Type de document :
Article dans une revue scientifique: Article original
DOI :
URL permanente :
Titre :
Liquid Phase Furfural Oxidation under Uncontrolled pH in Batch and Flow Conditions: The Role of In Situ Formed Base
Auteur(s) :
Roselli, Alessandra [Auteur]
Alma Mater Studiorum Università di Bologna = University of Bologna [UNIBO]
Carvalho, Yuri [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Dumeignil, Franck [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Unité de Catalyse et Chimie du Solide (UCCS) - UMR 8181
Cavani, Fabrizio [Auteur]
Alma Mater Studiorum Università di Bologna = University of Bologna [UNIBO]
Paul, Sebastien [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Wojcieszak, Robert [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Alma Mater Studiorum Università di Bologna = University of Bologna [UNIBO]
Carvalho, Yuri [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Dumeignil, Franck [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Unité de Catalyse et Chimie du Solide (UCCS) - UMR 8181
Cavani, Fabrizio [Auteur]
Alma Mater Studiorum Università di Bologna = University of Bologna [UNIBO]
Paul, Sebastien [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Wojcieszak, Robert [Auteur]
Unité de Catalyse et Chimie du Solide - UMR 8181 [UCCS]
Titre de la revue :
Catalysts
Numéro :
10
Pagination :
73
Date de publication :
2020-01-03
Discipline(s) HAL :
Chimie/Catalyse
Résumé en anglais : [en]
Selective oxidation of furfural to furoic acid was performed with pure oxygen in aqueous phase under mild conditions and uncontrolled pH using hydrotalcite-supported gold nanoparticles as catalyst. Hydrotalcites with ...
Lire la suite >Selective oxidation of furfural to furoic acid was performed with pure oxygen in aqueous phase under mild conditions and uncontrolled pH using hydrotalcite-supported gold nanoparticles as catalyst. Hydrotalcites with different Mg: Al ratios were tested as support. The effects of reaction time, temperature and furfural/catalyst ratio were evaluated. The catalyst Au/HT 4:1 showed the highest activity and selectivity to the desired product, achieving a complete conversion of furfural to furoic acid after 2 h at 110 °C. Further, stability tests were carried out in a continuous stirred-tank reactor and a progressive deactivation of the catalyst due to the leaching of Mg2+ cations from the support inducing changes in the pH of the reaction medium was observed.Lire moins >
Lire la suite >Selective oxidation of furfural to furoic acid was performed with pure oxygen in aqueous phase under mild conditions and uncontrolled pH using hydrotalcite-supported gold nanoparticles as catalyst. Hydrotalcites with different Mg: Al ratios were tested as support. The effects of reaction time, temperature and furfural/catalyst ratio were evaluated. The catalyst Au/HT 4:1 showed the highest activity and selectivity to the desired product, achieving a complete conversion of furfural to furoic acid after 2 h at 110 °C. Further, stability tests were carried out in a continuous stirred-tank reactor and a progressive deactivation of the catalyst due to the leaching of Mg2+ cations from the support inducing changes in the pH of the reaction medium was observed.Lire moins >
Langue :
Anglais
Comité de lecture :
Oui
Audience :
Internationale
Établissement(s) :
Université de Lille
CNRS
Centrale Lille
ENSCL
Univ. Artois
CNRS
Centrale Lille
ENSCL
Univ. Artois
Collections :
Équipe(s) de recherche :
Valorisation des alcanes et de la biomasse (VAALBIO)
Date de dépôt :
2020-11-25T12:22:21Z
2020-11-25T18:26:18Z
2020-11-25T18:26:18Z
Fichiers
- catalysts-10-00073-v2.pdf
- Version éditeur
- Accès libre
- Accéder au document