Magnetodielectric Nanocomposite Polymer-Based ...
Type de document :
Compte-rendu et recension critique d'ouvrage
DOI :
Titre :
Magnetodielectric Nanocomposite Polymer-Based Dual-Band Flexible Antenna for Wearable Applications
Auteur(s) :
Hamouda, Z. [Auteur]
Wojkiewicz, Jean-Luc [Auteur]
Pud, Alexander A. [Auteur]
Kone, Lamine [Auteur]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Bergheul, Said [Auteur]
Lasri, Tuami [Auteur]
Microtechnology and Instrumentation for Thermal and Electromagnetic Characterization - IEMN [MITEC - IEMN]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Wojkiewicz, Jean-Luc [Auteur]
Pud, Alexander A. [Auteur]
Kone, Lamine [Auteur]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Bergheul, Said [Auteur]
Lasri, Tuami [Auteur]

Microtechnology and Instrumentation for Thermal and Electromagnetic Characterization - IEMN [MITEC - IEMN]
Institut d’Électronique, de Microélectronique et de Nanotechnologie - UMR 8520 [IEMN]
Titre de la revue :
IEEE Transactions on Antennas and Propagation
Pagination :
3271-3277
Éditeur :
Institute of Electrical and Electronics Engineers
Date de publication :
2018
ISSN :
0018-926X
Discipline(s) HAL :
Sciences de l'ingénieur [physics]
Résumé en anglais : [en]
One of the major challenges in wireless communication technologies is the antenna design. In this paper, a wide-band flexible antenna made by covering a Kapton substrate with a flexible magnetodielectric polymer-based ...
Lire la suite >One of the major challenges in wireless communication technologies is the antenna design. In this paper, a wide-band flexible antenna made by covering a Kapton substrate with a flexible magnetodielectric polymer-based nanocomposite layer is proposed. This novel magnetodielectric polymer-based nanocomposite relies on carbon-coated cobalt (CCo) and is coated with a conjugated polymer, polyaniline (PANI). The nanocomposite (PANI/CCo) fabrication, whose morphology was studied via scanning electron microscopy, demonstrates a relative permeability, a dielectric permittivity, and a conductivity of 5.5, 4.3, and 7500 S/m, respectively. In this paper, two frequency bands are of interest [1.8-2.45 GHz (personal communication service and wireless local area network) and 5.15-5.825 GHz (wireless networks)]. The functioning of the antenna in free space and on body is numerically and experimentally investigated. The average specific absorption rate is also discussed. Thanks to its performance this magnetodielectric nanocomposite polymer (PANI/CCo) antenna has been found to be a good candidate for wearable applications where complex bending situations are encountered.Lire moins >
Lire la suite >One of the major challenges in wireless communication technologies is the antenna design. In this paper, a wide-band flexible antenna made by covering a Kapton substrate with a flexible magnetodielectric polymer-based nanocomposite layer is proposed. This novel magnetodielectric polymer-based nanocomposite relies on carbon-coated cobalt (CCo) and is coated with a conjugated polymer, polyaniline (PANI). The nanocomposite (PANI/CCo) fabrication, whose morphology was studied via scanning electron microscopy, demonstrates a relative permeability, a dielectric permittivity, and a conductivity of 5.5, 4.3, and 7500 S/m, respectively. In this paper, two frequency bands are of interest [1.8-2.45 GHz (personal communication service and wireless local area network) and 5.15-5.825 GHz (wireless networks)]. The functioning of the antenna in free space and on body is numerically and experimentally investigated. The average specific absorption rate is also discussed. Thanks to its performance this magnetodielectric nanocomposite polymer (PANI/CCo) antenna has been found to be a good candidate for wearable applications where complex bending situations are encountered.Lire moins >
Langue :
Anglais
Vulgarisation :
Non
Source :