Thermoplastic matrix-based composites ...
Type de document :
Article dans une revue scientifique: Article de synthèse/Review paper
URL permanente :
Titre :
Thermoplastic matrix-based composites produced by resin transfer molding: A review
Auteur(s) :
Campos, Bernard [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Fontaine, Gaelle [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Bourbigot, Serge [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Bonnet, Fanny [Auteur correspondant]
Unité Matériaux et Transformations (UMET) - UMR 8207
Unité Matériaux et Transformations (UMET) - UMR 8207
Fontaine, Gaelle [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Bourbigot, Serge [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Bonnet, Fanny [Auteur correspondant]
Unité Matériaux et Transformations (UMET) - UMR 8207
Titre de la revue :
Polymer Composites
Date de publication :
2022
ISSN :
0272-8397
Discipline(s) HAL :
Chimie/Matériaux
Chimie/Polymères
Chimie/Polymères
Résumé en anglais : [en]
The recycling of thermoset-based composites is challenging. The replacement
of thermosetting resins with thermoplastics is an initial step to address this
issue, together with the use of green reinforcements. Owing to ...
Lire la suite >The recycling of thermoset-based composites is challenging. The replacement of thermosetting resins with thermoplastics is an initial step to address this issue, together with the use of green reinforcements. Owing to the recent development of low-viscosity thermoplastic resins, it is possible to produce thermoplastic matrix composites using the resin transfer molding (RTM) technique, which was originally conceived for the production of thermosetting matrix composites. These resins are based on cyclic esters, methyl methacrylate, and cyclic (butylene terephthalate) oligomers. This review presents the state-of-the-art works reported on the production of thermoplastic matrix composites via a thermoplastic RTM (TP-RTM) process, from the in situ polymerization of the resins through the optimization of the TP-RTM parameters for the evaluation of the composite properties.Lire moins >
Lire la suite >The recycling of thermoset-based composites is challenging. The replacement of thermosetting resins with thermoplastics is an initial step to address this issue, together with the use of green reinforcements. Owing to the recent development of low-viscosity thermoplastic resins, it is possible to produce thermoplastic matrix composites using the resin transfer molding (RTM) technique, which was originally conceived for the production of thermosetting matrix composites. These resins are based on cyclic esters, methyl methacrylate, and cyclic (butylene terephthalate) oligomers. This review presents the state-of-the-art works reported on the production of thermoplastic matrix composites via a thermoplastic RTM (TP-RTM) process, from the in situ polymerization of the resins through the optimization of the TP-RTM parameters for the evaluation of the composite properties.Lire moins >
Langue :
Anglais
Comité de lecture :
Oui
Audience :
Internationale
Vulgarisation :
Non
Établissement(s) :
Université de Lille
CNRS
INRA
ENSCL
CNRS
INRA
ENSCL
Collections :
Équipe(s) de recherche :
Ingénierie des Systèmes Polymères
Date de dépôt :
2022-03-11T12:42:45Z
2022-03-14T10:20:33Z
2022-03-14T10:20:33Z