Powder Metallurgy Processing and ...
Type de document :
Article dans une revue scientifique
DOI :
URL permanente :
Titre :
Powder Metallurgy Processing and Characterization of the χ Phase Containing Multicomponent Al-Cr-Fe-Mn-Mo Alloy
Auteur(s) :
Stasiak, Tomasz [Auteur]
Sow, Mourtada Aly [Auteur]
Unité Matériaux et Transformations - UMR 8207 [UMET]
Touzin, Matthieu [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
béclin, franck [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
CORDIER, Catherine [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Sow, Mourtada Aly [Auteur]
Unité Matériaux et Transformations - UMR 8207 [UMET]
Touzin, Matthieu [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
béclin, franck [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
CORDIER, Catherine [Auteur]
Unité Matériaux et Transformations (UMET) - UMR 8207
Titre de la revue :
Alloys
Nom court de la revue :
Alloys
Numéro :
2
Pagination :
44-54
Éditeur :
MDPI AG
Date de publication :
2023-02-13
ISSN :
2674-063X
Résumé en anglais : [en]
High entropy alloys present many promising properties, such as high hardness or thermal stability, and can be candidates for many applications. Powder metallurgy techniques enable the production of bulk alloys with fine ...
Lire la suite >High entropy alloys present many promising properties, such as high hardness or thermal stability, and can be candidates for many applications. Powder metallurgy techniques enable the production of bulk alloys with fine microstructures. This study aimed to investigate powder metallurgy preparation, i.e., mechanical alloying and sintering, non-equiatomic high entropy alloy from the Al-Cr-Fe-Mn-Mo system. The structural and microstructural investigations were performed on powders and the bulk sample. The indentation was carried out on the bulk sample. The mechanically alloyed powder consists of two bcc phases, one of which is significantly predominant. The annealed powder and the sample sintered at 950 °C for 1 h consist of a predominantly bcc phase (71 ± 2 vol.%), an intermetallic χ phase (26 ± 2 vol.%), and a small volume fraction of multielement carbides—M6C and M23C6. The presence of carbides results from carbon contamination from the balls and vial during mechanical alloying and the graphite die during sintering. The density of the sintered sample is 6.71 g/cm3 (98.4% relative density). The alloy presents a very high hardness of 948 ± 34 HV1N and Young’s modulus of 245 ± 8 GPa. This study showed the possibility of preparing ultra-hard multicomponent material reinforced by the intermetallic χ phase. The research on this system presented new knowledge on phase formation in multicomponent systems. Moreover, strengthening the solid solution matrix via hard intermetallic phases could be interesting for many industrial applications.Lire moins >
Lire la suite >High entropy alloys present many promising properties, such as high hardness or thermal stability, and can be candidates for many applications. Powder metallurgy techniques enable the production of bulk alloys with fine microstructures. This study aimed to investigate powder metallurgy preparation, i.e., mechanical alloying and sintering, non-equiatomic high entropy alloy from the Al-Cr-Fe-Mn-Mo system. The structural and microstructural investigations were performed on powders and the bulk sample. The indentation was carried out on the bulk sample. The mechanically alloyed powder consists of two bcc phases, one of which is significantly predominant. The annealed powder and the sample sintered at 950 °C for 1 h consist of a predominantly bcc phase (71 ± 2 vol.%), an intermetallic χ phase (26 ± 2 vol.%), and a small volume fraction of multielement carbides—M6C and M23C6. The presence of carbides results from carbon contamination from the balls and vial during mechanical alloying and the graphite die during sintering. The density of the sintered sample is 6.71 g/cm3 (98.4% relative density). The alloy presents a very high hardness of 948 ± 34 HV1N and Young’s modulus of 245 ± 8 GPa. This study showed the possibility of preparing ultra-hard multicomponent material reinforced by the intermetallic χ phase. The research on this system presented new knowledge on phase formation in multicomponent systems. Moreover, strengthening the solid solution matrix via hard intermetallic phases could be interesting for many industrial applications.Lire moins >
Langue :
Anglais
Audience :
Non spécifiée
Établissement(s) :
Université de Lille
CNRS
INRAE
ENSCL
CNRS
INRAE
ENSCL
Collections :
Équipe(s) de recherche :
Métallurgie Physique et Génie des Matériaux
Date de dépôt :
2023-02-15T16:12:45Z