Catalytic Oxidation of Volatile Organic ...
Document type :
Article dans une revue scientifique: Article original
DOI :
Permalink :
Title :
Catalytic Oxidation of Volatile Organic Compounds Alone or in Mixture over Mg<sub>4</sub>Al<sub>2-x</sub>Ce<sub>x</sub> Mixed Oxides
Author(s) :
Sahraoui, F. [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Haddad, N. [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Lamonier, Jean-Francois [Auteur]
Unité de Catalyse et Chimie du Solide (UCCS) - UMR 8181
Rabia, C. [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Haddad, N. [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Lamonier, Jean-Francois [Auteur]
Unité de Catalyse et Chimie du Solide (UCCS) - UMR 8181
Rabia, C. [Auteur]
Université des Sciences et de la Technologie Houari Boumediene = University of Sciences and Technology Houari Boumediene [Alger] [USTHB]
Journal title :
Catalysts
Volume number :
13
Pages :
1269
Publication date :
2023-10-24
ISSN :
2073-4344
English keyword(s) :
catalytic oxidation
n-butanol
hydrotalcite
cerium
n-butanol
hydrotalcite
cerium
HAL domain(s) :
Chimie/Catalyse
English abstract : [en]
This study investigates Ce-containing MgAl layered double hydroxides (LDH), focusing on its structural and catalytic properties. Mg4Al2−xCex (x = 0; 0.4; 0.8; 2) hydrotalcite-like compounds were prepared using the ...
Show more >This study investigates Ce-containing MgAl layered double hydroxides (LDH), focusing on its structural and catalytic properties. Mg4Al2−xCex (x = 0; 0.4; 0.8; 2) hydrotalcite-like compounds were prepared using the co-precipitation method. The effects of cerium content and calcination temperature on the structural and catalytic properties of Ce-containing MgAl LDH were investigated. The samples were characterized by XRD, BET, Raman, XPS, and DTA/TGA techniques. The catalytic activity of the resulting compound in n-butanol oxidation was studied. Increasing the calcination temperature (from 280 to 500 °C) caused changes in the structural, textural, and reducibility properties. The Mg4Al2−xCex LDH structure series (calcined at 280 °C) exhibited the highest catalytic activity, especially for x = 2. The material’s properties improved with increased Ce content, allowing complete butanol conversion below 280 °C. The formation of active sites occupied by cerium within the LDH structure, along with its reducibility properties, contributed to the material’s performance. The Ce3+/Ce4+ redox couple in the external layers enhanced O2− diffusion and their activation into nucleophilic species, facilitating butanol transformation. Adding water vapor to the reaction mixture slightly decreased the butanol oxidation, while the presence of ethyl acetate and butanol together exhibited a mutual inhibitory effect, with butanol demonstrating a more prominent influence.Show less >
Show more >This study investigates Ce-containing MgAl layered double hydroxides (LDH), focusing on its structural and catalytic properties. Mg4Al2−xCex (x = 0; 0.4; 0.8; 2) hydrotalcite-like compounds were prepared using the co-precipitation method. The effects of cerium content and calcination temperature on the structural and catalytic properties of Ce-containing MgAl LDH were investigated. The samples were characterized by XRD, BET, Raman, XPS, and DTA/TGA techniques. The catalytic activity of the resulting compound in n-butanol oxidation was studied. Increasing the calcination temperature (from 280 to 500 °C) caused changes in the structural, textural, and reducibility properties. The Mg4Al2−xCex LDH structure series (calcined at 280 °C) exhibited the highest catalytic activity, especially for x = 2. The material’s properties improved with increased Ce content, allowing complete butanol conversion below 280 °C. The formation of active sites occupied by cerium within the LDH structure, along with its reducibility properties, contributed to the material’s performance. The Ce3+/Ce4+ redox couple in the external layers enhanced O2− diffusion and their activation into nucleophilic species, facilitating butanol transformation. Adding water vapor to the reaction mixture slightly decreased the butanol oxidation, while the presence of ethyl acetate and butanol together exhibited a mutual inhibitory effect, with butanol demonstrating a more prominent influence.Show less >
Language :
Anglais
Peer reviewed article :
Oui
Audience :
Internationale
Popular science :
Non
Administrative institution(s) :
Université de Lille
CNRS
Centrale Lille
ENSCL
Univ. Artois
CNRS
Centrale Lille
ENSCL
Univ. Artois
Collections :
Research team(s) :
Remédiation et matériaux catalytiques (REMCAT)
Submission date :
2023-10-27T00:38:39Z
2023-10-27T08:46:34Z
2023-10-27T09:30:53Z
2023-10-27T08:46:34Z
2023-10-27T09:30:53Z
Files
- catalysts-13-01269-v2.pdf
- Version éditeur
- Open access
- Access the document